Can I change the voltage set points of the charge controller?
Yes. There are 2 ways of doing this. The easiest is to ask a Inclusive Energy member of staff to change the settings remotely. Or you could do it yourself via the serial port at the front of the device.
The charge controller responds to 'thingset', the command will look like this:
=conf {"LoadDisconnect_V": 11.7, "LoadReconnect_V": 12.3}
This will be changed slightly in future versions of the charge controller and this document will be updated accordingly. Therefore, please check back here for updates.
If you would like guidance on how to access the charge controller serial port, please contact a member of Inclusive Energy staff.
Related Articles
Charge Controller Specifications
PWM 12/24V 20A Battery voltage 12/24V Auto Select Rated battery current 20A Nominal PV power, 12V <300W Nominal PV power, 24V <600W Maximum PV open circuit voltage 55V Maximum PV nominal current 20A Operating temperature -10 °C to +50 °C Operating ...
What happens if I have a broken charge controller?
You have a full-year warranty on the CS hardware. In the rare case, your device is broken, you have to contact the supplier of the CS unit. That can be a distributor in your country or Inclusive Energy. We will attempt to fix the issue on-site and ...
Pending Change
If the load status of a device is pending change, this means that the load has been requested to turn off or on but the change hasn't been affected yet. There are a couple of reasons why this could be: The device only checks for a change in status ...
Battery Chemisty
Cloud Solar supports lead acid (AGM) batteries by default. The Cloud Solar charge controller does support alternative battery chemistries but the settings must be changed either by a technician or can be done remotely by one of the Inclusive Energy ...
What solar panels can I use?
PWM charge controller With a PWM charge controller, it is important that you try to match the nominal voltage of a solar panel with the battery voltage of the system. Please use the reference table below: # cells in series Nominal Voltage Open ...