Replacing a Device

Replacing a Device

If you need to chance a customer's Cloud Solar device, then you can update this information on the platform.

Click on the customer from the Customers table and click the edit icon in the User widget. You will be directed to the Registration Form where the Cloud Solar Device ID can be updated.

Note that the user's energy related data will be lost, so make sure to download this first. 



    • Related Articles

    • Hardware Troubleshooting

      This article explains the various errors/faults that can occur on your Cloud Solar device and the basic steps for troubleshooting before the device is declared as broken. The Charge Controller does not turn ON It could be due to incorrect or loose ...

    • Diagnosis

      In the 'device' section for each customer, there is a diagnosis tool. If the device is operating as it should be this will automatically be set to 'None' If there has been no activity from the device for 24 hours, it will automatically be set to 'To ...

    • Pending Change

      If the load status of a device is pending change, this means that the load has been requested to turn off or on but the change hasn't been affected yet. There are a couple of reasons why this could be:  The device only checks for a change in status ...

    • SIM Card Insertion/Replacement

      To insert or replace a SIM card, take the Cloud Solar device enclosure off and insert a nano-SIM into the SIM card slot, in the orientation shown in the images below

    • Data Page

      Last Seen and Signal Strength Last seen lets you know when the device last communicated with the server. The information displayed on the page is from the time that the device was 'last seen'. Signal strength shows the strength of the connection that ...